In this page we have tried to gather all the information you may need during the production of your vinyl. Please read the following carefully so that we can produce your record as quickly as possible and minimize the chance of any misunderstandings.
about the AUDIO
When making audio recordings, please note the following:
- make wav or aiff file
- 16/24 bit (please do not send 32 bit files!)
- min 44.1 kHz
- cut below 10Hz and over 16 000 Hz
- do not use flanger and chorus on the deep range
- stereo image between +0.5 and +1.0
- deeps less 300 Hz in mono
- max 22 min/side
- limiter/maximizer +/- 0 db
- master +/- 0dB
- -12 RMS
- be especially careful not to have a peak in it!
- upload the audio in one file per page. The file name should start with the page, e.g. Axxxx.wav
Please fill out the cue sheet for mastercut, you can find the sample here: Cue Sheet
Upload the signed copyright declaration along with the audio files: Copyright Declaration
It is important that you use a vinyl master for the recording. If you request it, we will review and improve the audio materials based on a custom fee, otherwise the recordings will not be checked by us!
Do you want a colored disc? You can find the basic colors here: Hanaton Vinyl Colors
about the GRAPHICS
Follow the parameters below to create graphic materials:
- please use our templates
- if possible, please return the material in pdf format, we do not take responsibility for handling open source files (corel, ai, psd)
- the image should be CMYK, 300 dpi
- please arrange the graphic material in the center of the workspace and remove all crop marks and template patterns
- always make sure that the graphic has 3mm bleed, as in the template file.